dec: 24 hex: 18 bin: 11000
The Invert Cell, is an array logic gate. Array gates have gate logic as well as 1 or more pass-through wires. They are also slightly taller than normal gates.
|Circuit Plate +
Wired Plate +
Platformed Plate +
The Invert Cell has a total of 4 inputs outputs. All IOs in this gate act as wires. The wire connecting the front and back is the bottom wire and the left and right wire is the top wire.
The Invert cell acts much like 2 separate wires in a single block. This gate can allow one 'wire' to transverse between the front and back, and the other between left and right without crossing the signals. If the bottom wire is unpowered, a signal is conducted upwards to the top wire. When the bottom one is powered, the top returns to its natural state. Unlike traditional gates, there is no delay when passing a signal between inputs; it functions identically to wires.
|v4.0.0||Added the Invert Cell.|
Issues pertaining to "Invert Cell" are maintained on the ProjectRed Github page. Report issues there.