dec: 13 hex: D bin: 1101
The Toggle Latch is a sequential logic gate with 2 inputs and 2 outputs.
Circuit Plate +
Conductive Plate +
The Toggle Latch has 2 input and 2 outputs. When placed, on the ground, the left and right are inputs, while the front and back are outputs.
The Toggle latch has 2 sides of output. At any given time, one of these outputs are enabled while the other is disabled. When either input goes from low to high, the state of the two outputs will swap. The lever on the gate visually indicates which output is enabled.
The gate itself can also be right-clicked with anything other than a screwdriver to manually flip the lever and change the state.
|v4.0.0||Added the Toggle Latch.|
Issues pertaining to "Toggle Latch" are maintained on the ProjectRed Github page. Report issues there.