dec: 18 hex: 12 bin: 10010
The Sequencer is sequential logic gate with 4 outputs. It sends out signals to each side in a sequence, with each one enabled for a set period.
|Circuit Plate +
The Sequencer has 4 outputs, one on each side.
As the Sequencer's needle rotates either clockwise or counter-clockwise about the gate, the respective output is enabled for a set number of time. The amount of time each output is active for can be set with the GUI.
A shift-right-click with a screwdriver will change the direction of rotation of the needle.
|The timer GUI contains a few buttons to edit the timer value, which is show on the top. Several time-based gates share this same GUI.|
|v4.0.0||Added the Sequencer.|
Issues pertaining to "Sequencer" are maintained on the ProjectRed Github page. Report issues there.