Bus Input Panel
| Type |
Multipart block |
|---|---|
| Physics |
No |
| Transparency |
Yes (partial) |
| Luminance |
Yes, 7 |
| Blast resistance | |
| Tool |
Any tool |
| Renewable |
Yes |
| Stackable |
Yes (64) |
| Flammable |
No |
| Availability |
Survival |
| First appearance | |
| Drops |
Itself |
| Data value |
dec: 30 hex: 1E bin: 11110 |
| Multipart ID |
pr_bgate |
The Bus Input Panel, is a bundled logic gate with 1 input and 1 output. It has 16 individual coloured buttons that can be clicked on to cause the gate to output that signal.
Obtaining
Crafting
Lua error: callParserFunction: function "#dplvar" was not found.
Usage
I/O
The Bus Input Panel has a total of 1 input and 1 output. When placed on the ground, the front is the reset, while the back is the bundled output.
Logic
When any button on the face of the bus input panel is clicked, that colour turns on in the bundled output. If the button is clicked again, the signal turns off. If the reset input receives a redstone signal, all buttons reset to off. While the reset input is high, the buttons cannot be pressed.
History
| Version | Changes |
|---|---|
| v4.4.7 | Added the Bus Input Panel. |
Issues
Issues pertaining to "Bus Input Panel" are maintained on the ProjectRed Github page. Report issues there.
