Red Alloy Wire
- See also: Framed red alloy wires
|Red Alloy Ingot|
As a Crafting Ingredient
|Framed Red Alloy Wire||Oak Wood Strip +
Red Alloy Wire
|Wired Plate||Red Alloy Wire +
Red alloy wires are a type of surface wire. Surface wires are the primary type of wire. They must be placed on a solid surface. They can be run up walls and such, but will fall if the block they are sitting on is removed, much like torches. Wires can also be run around corners or between edges. These are the types of wires that you will use most often. The following properties are shared among every type of surface wire.
|Wires can be run up walls.|
|Wires can snap onto other wires or devices within the same block.|
|Wires will connect around corners to other wires or devices.|
|Wire connections can be obscured by other parts such as covers.|
A red alloy wire will power anything that it is connected to, as well as any block around it. It also strongly powers the block it is sitting on. If the block it is attached to is strongly powered, then the wire will also be powered up.
Red alloy wires will connect to any thing that can interface with redstone, such as a piston. However, even if it doesn't visually connect, any adjacent blocks will be powered. The block it is sitting on will receive a strong signal, while all other block around it will get a weak signal. No visual connections doesn't mean that block won't be affected.
|Red alloy wires will connect to other alloy wires or insulated wires, but won't connect to bundled cables.|
|Red alloy wires will weakly power anything around them, even if they don't directly connect.|
|Red alloy wires will be powered up if their support block is receiving a strong signal.|
|Red alloy wires will strongly power the block they are attached to.|
|v4.0.0||Added the Red Alloy Wire.|
Issues pertaining to "Red Alloy Wire" are maintained on the ProjectRed Github page. Report issues there.